We export to clients around the globe
AQUADECK is fully compliant to the Harmonised European Standard BSEN1433.
AQUADECK is CE marked but also carries the new (from 1st January 2021) UKCA mark, which following the UK’s departure from the EU will replace the CE mark for all UK projects.
For additional qualty and assurance AQUADECK has also been certified and awarded the prestigious BSI Kitemark, meaning the product has been checked against all aspects of the standard, not just the minimum requirements for CE/UKCA certification and is subject to ongoing surveillance and checks (Product Certification) – equivalent to AoC (Attestation of Conformity) system 1 throughout manufacture and supply.
For more information on UKCA marking and the kitemark:
BSI Kitemark – UK Product and Service Quality Certification Mark | BSI (https://www.bsigroup.com/en-GB/)
ECCLES HOLD BSEN1433 KITEMARK CERTIFICATION
If you would like to find out more about the AQUADECK system please
firstname.lastname@example.org for a brochure and more comprehensive drawings of all component products.
* UKCA/CE DoCs also available for AQUADECK Channel units.
Testing Report No BSI – 2371/3273048
Product code SDC base outlet option – product code SDC 0
AQUADECK is designed and FPC tested to a Min design load of D440KN In-house CAD design/computer modelling and load simulation abilities.
(Group 4) BSEN1433.
Testing free standing as a Type I unit.
(BSEN1433 Clause 6.1.1)
AQUADECK requires no additional on-site support to withstand compressive loads.
In-house CAD design/computer modelling and load simulation abilities.
Aquadeck installation is simple and the units are fast to install, the whole
process can be carried out by experienced kerb layers. The system is laid on
AQUADECK Bedding Compound and adjusted to line and level.
AQUADECK sealant is gun applied to the ends of the unit to form a watertight seal.
PLEASE REFER TO OUR AQUADECK INSTALLATION GUIDE FOR MORE INFORMATION. *
* Plus 10% follows Kitemark protocol for Manhole Cover testing to BSEN124 for Kitemark accreditation.
Clients are welcome to visit our purpose built test facility at Walsall where they can witness load testing of AQUADECK units from our stock products or their own site specific production runs.
Eccles UK are pleased and excited to announce the introduction of AQUADECK, a high strength combined kerb drainage system for use on bridges and/or any elevated roadway.
Our Eccles team have many years experience in the design, manufacture and supply of Bridge Drainage Systems in a variety of materials.
Our history in this sector spans over 3 decades, indeed our castings can be found still in service on projects such as the Birmingham Toll Road, A13 Canning Town, Avonmouth Bridge, and on the M6 at Bromford where over many schemes we have supplied over 30,000 units making the Bromford Viaduct home to some of the longest runs of Bridge drainage units anywhere in the world.
AQUADECK Flush fitting drainage channels and AQUADECK Sub Drain complete the AQUADECK Bridge Drainage system.
Main picture – M6 Bromford Viaduct
Home to thousands of “Eccles manufactured” bridge drain units.
Below – A13 Canning Town
Eccles castings on A13 Flyover.
Our technical design team welcome enquires from bridge engineers and contractors for bridge projects from early design stage to contract award.
We can advise on rainfall levels across the UK following guidance from Highways England DMRB/MCHW depending on your project location.
Armed with this data we can advise the most cost effective solutions from our wide range of AQUADECK products for your particular structure.
For help with your project please contact:
Simply fill in the form below and we will send you a brochure.
If you require BRIDGE DRAINAGE, we can help.
Simply fill in the form below and one of our expert team will be in touch to help.